Tags: Nanjing Testing machine, Jiangsu Testing machine, high cost performance Testing machine, Sansi Testing machine, Nanjing tension machine, Jiangsu tension machine, high cost performance tension machine, Sansi tension machine
Equipment Overview:
PIT series D-type metal pendulum bob Impact Testing machine is a metal material under dynamic load Impact resistance performance testing equipment, and a lot to do continuous metal Impact test, and displays the Impact absorbed energy, Impact toughness, pendulum bob rotation angle and print test reports. Metal materials manufacturers, quality inspection departments the necessary testing equipment, also new materials research unit indispensable test equipment. The models can be equipped with fully automated sample delivery system, can greatly improve test efficiency, reduce labor intensity test.
Maximum Impact energy: 450J (150J, 300J), 750J (change pendulum meet 300J, 450J, 600J)
Main features: used for metal Charpy Impact test, draw metal samples Impact absorbed energy.
main feature:
1. The main frame and the base casting process integrated design, symmetrical around the column, the pendulum shaft supported by the use of a simply supported beam mode. With high stability, rigidity, simple structure, reliable, high precision machining, did not tremble when pendulum bob Impact, more suitable for high energy Impact.
2. round pendulum design, drag to a minimum. Impact knife with screw fastening wedge clamping installation, simple and easy to replace.
3. hanging pendulum device uses a buffer designed to avoid hanging pendulum Impact and when it may cause damage, effectively reduce the noise when hanging pendulum, extending the life of the equipment and improving safety.
4. The use of a standard two-stage reducer replace old-fashioned pendulum bob complex transmission system, simple structure, easy assembly and maintenance, long life, low failure rate. Solve the main fault of the old-fashioned pendulum bob.
5. There are three energy display mode, the three way joint display, the results can be compared with each other and can perfectly valid rule out possible problems.
6. With a sample recovery, it can bring out the waste sample after Impact Testing machine outside, avoid testing personnel into the internal recycling of waste samples Testing machine, which improves the working efficiency, but also improve the safety of testing personnel.
7. The safety net has closed, can effectively prevent breakage sample splash can be prevented during the test into the test personnel Testing machine interior, to ensure the safety of testing personnel and equipment.
8. The device uses Siemens S7-200 series PLC control system design. Nemi controlled using high-precision rotary encoder to obtain real-time location of pendulum bob. Anti-jamming ability, with reliable, stable and accurate data and so on.
Meet the standard:
1. GB / T 3808-2002 "pendulum bob style Impact Testing machine inspection"
2. GB / T 229-2007 "Charpy Impact test method"
3. JJG 145-2007 "pendulum bob style Impact Testing machine"
4. ASTM E23-02a "metal material sample standard notch Impact test method" (put only to meet with American Standard)
5. ISO148-1998 "Metallic materials - Charpy pendulum impact test"
By Industry:
Measurement of Quality; iron and steel metallurgy; machinery manufacturing; universities; research laboratories; commodity inspection arbitration, technical supervision departments; other industries.
Original configuration:
Host 1, the sample recovery unit set, a protective cover
Scalable configurations:
Low temperature devices, automatic sample delivery device, instrumentation Impact System
Technical Parameters:
Name
|
Double column metal pendulum bob
|
Model
|
PIT452D-2, PIT452D-3, PIT452D-4
|
PIT752D-2, PIT752D-3, PIT752D-4
|
Optional pendulum bob (simply supported beam)
|
150J, 300J, 450J
|
300J, 450J, 600J, 750J
|
Impact rate
|
5.24m / s
|
Pre-elevation pendulum bob
|
150 °
|
The minimum angle of resolution
|
0.025 °
|
Swing axle center to center distance of the sample
|
750mm
|
The specimen bearing
|
Span
|
40mm
|
End arc radius
|
1mm
|
Supporting surface inclination
|
11 ° ± 1 °
|
Impact blade
|
Arc radius
|
2mm or 8mm
|
Angle
|
30 °
|
Thickness
|
16mm
|
Sample size
|
55mm × 10mm × 10mm; 55mm × 10mm × 7.5mm; 55mm × 10mm × 5mm
|
Dimensions
|
2100mm × 835mm × 2100mm
|
Weight
|
About 900kg
|
Host power
|
AC three-phase five-wire 380V ± 10% 50Hz 1.5kW
|