A box structure 
1, the interior of Import (SUS304) quality mirror stainless steel plate 
2, no reaction door handle, easier operation; 
3, outside the gallbladder are of high quality (t = 1.2mm) A3 steel plate CNC machining into type, shell surface spray, more clean and beautiful; 
4, the interior of the sample holder, Jig and catheter fittings are used easily by ozone decomposition, and the effects of ozone concentrations stainless steel and other materials. Sample holder can rotate 360 ​​degrees; 
5, multi-layer hollow glass observation window, glue chip inside the conductive film (can be clearly observed during the test); 
6, stirring system: The long axis of the fan motor, high temperature resistance of stainless steel multi-blade impeller, in order to reach the intensity of convective vertical diffusion cycle; 
7, using double sheets of high temperature resistance seal between the cabinet door and the cabinet, in order to ensure a closed test area; 
8, the bottom of the machine can be fixed installation of high-quality PU wheels, the machine can easily be moved to the specified location, and finally fixed castors.

Two, Ozone aging test chamber reference standard: 
GB / T7762-2003 ozone aging test of vulcanized rubber or thermoplastic rubber resistant to ozone cracking - Static Tensile test method 
Test methods GB / T2951.21-2008 ozone aging test cables Common test methods for insulating and sheathing materials and other ozone aging test relevant standards 
Model Specifications: 
Model: CYL-50 Studio Size: 800 × 700 × 900 Size: 1200 × 1000 × 1800

Third, the control system 
1, the use of "Taiwan Willen" 5.7-inch color Touch screen and "Siemens" PLC module control, automatic handwriting settings, intuitive user interface, overall nice, simple and easy to operate; 
2. Accuracy: 0.1 ℃ (display range); 
3, resolution: ± 0.1 ℃; 
4. The heating system uses far infrared heating wire nickel alloy high-speed heating; 
5, ozone, temperature, humidity, completely independent refrigeration systems; 
6, the temperature control output by the microcomputer calculus, to achieve high precision and high efficiency power efficiency;

Fourth, other control systems 
1, Compressor: closed France Taikang brand; 
2, cooling mode: air-cooled compressed refrigerant; 
4, the refrigeration system overload, cooling system overpressure; 
5, the overall equipment overtemperature, overall equipment due to phase / reverse phase, overall equipment regularly; 
6, there are other leakage, water shortages, operation instructions, fault alarm and automatic shutdown protection.

Fifth, detailed specifications 
1, temperature range: 25 ℃ ~ 65 ℃ (adjustable) 
2, the temperature uniformity: ± 2 ℃ (no load) 
3, the temperature fluctuation: ± 0.5 ℃ (no load) 
4, the temperature deviation: ± 2 ℃ 
5, humidity range: 30 ~ 65% R H? 
6, humidity uniformity: + 2, -3% R H
7, heating rate: 0.7-1.0 ℃ / min 
8, the time setting range: 1 ~ 9999H 
9, ozone concentration: 50 ~ 500pphm 
10, gas flow rate: 8 ~ 16mm / S 
11, the sample rack speed: 1 turn / min (adjustable) 
12, Jig elongation: 5 to 45% 
13, the total power: 7.0KW

Sixth, equipment conditions of use 
1, ambient temperature: 5 ℃ ~ + 28 ℃ (within 24 hours the average temperature ≤28 ℃) 
2, humidity: ≤85% R H? 
3, Power requirements: AC380V ± 10% 50 ± 0.5Hz three-phase four-wire system 
4, pre-installed capacity: 7KW 
Ozone aging test equipment can be used for rubber-based products such as vulcanized rubber, thermoplastic rubber, cable insulation sheathing and other products in the static tensile deformation under exposure to light containing a sealed non-constant ozone concentration in the air and the temperature of the chamber, according to a predetermined Time on the sample for testing, the degree of change from the sample surface cracks occur, or other properties, in order to assess resistance to ozone aging properties of rubber;